STOCK AVAILABLE RIGHT NOW
EMAIL OR PHONE TO ARRANGE COLLECTION
AS THE SPEARS ARE TOO LARGE TO POST
Unlimited water on the sandy beaches is now a reality.
Click on the YouTube link below to see a demo of how to use the GLIND Sand Spear and how to jet it into the ground.
Simply dig away the dry powdery sand, and pump water down, via the jetting tube into the new GLIND Jet Sand Spear and wiggle it as it is self burying into the beach, then once you are in the fresh water table, change from the jetting tube to the delivery tube and you’re done.
The jetted water runs down its own separate tube to push sand away and allows simple burying.
Matches perfectly with the GLIND Cape Yorker or GLIND Original hot shower system, as the pump provided on these units will allow for jetting and delivery.
This version has check valves on the jet down, and the screen delivery lines, so you can never get it wrong.
The check valves are 3 piece and cleanable, just in case anything goes wrong.
The check valves also have brass garden connectors for easy click on, click off use.
Made completely from 316 stainless steel, the GLIND Jet Sand Spear is 1600mm overall length, 50mm diameter and has a 260mm effective length.
This means you can pump up to 17 l/min from it.
To get your hands on 1 of these hand made custom built Spears, you must email or phone the GLIND office to find out about availability.
The Glind Jet Sand Spear is too long and too heavy to Post, so they must be collected from the GLIND Office. EFTPOS facilities are available at the Office.
Remember to check with your local authorities to see if a Sand Spear is right to use.